With the growing demand for high-efficiency drive systems for industrial oil pumps, BG Motor has launched a new high-performance AC motor tailored for oil pump systems, with high speed, stability and long life design.
When industrial equipment develops in the direction of high efficiency and small size, the design of oil pump motors will inevitably tend to be higher speed, more compact structure, and output more power in a limited space
In order to meet the needs of customers, we have sent technicians for technical research and development many times, and finally manufactured an oil pump motor that is very suitable for customer needs in terms of data and performance, including follow-up services
1. High torque starting capability
▲The fluid resistance is high when the oil pump is first started, especially in high-viscosity oils or cold environments.
▼The motor must have a strong starting torque to avoid "jamming" or repeated start and stop.
2. Continuous work reliability (heat-resistant, pressure-resistant, durable)
▲Oil pumps often run continuously for a long time, which requires the motor to have high-temperature windings,
bearing wear resistance, and high insulation and pressure resistance levels.
▼It is necessary to meet the S1 continuous duty standard.
3. Stable high speed output
▲For high-flow conveyance, the motor needs to be able to consistently deliver high-speed speeds such as 13,000
–15,000 rpm.
▼The motor is required to have low vibration, low temperature rise and no burn-in at high speed.
4. Power matching and energy efficiency ratio
▲The power needs to be accurately matched according to the flow, head, viscosity and other requirements of the
oil pump (such as 750W).
▼Higher energy efficiency ratings, such as IE2/IE3, help businesses save energy and reduce consumption.
5. Installation compatibility and customization requirements
▲The structure of the oil pump is diverse, and customers have specific requirements for the installation size, outlet
method, shaft length, and flange hole spacing of the motor.
▼Motor manufacturers need to support custom designs and provide flexible docking solutions.
6. Anti-oil mist and anti-corrosion performance
▲Oil mist, liquid splashes or corrosive gases are common in industrial sites, and motors need to be protected with
IP ratings (e.g. IP54/IP55) or even oil-sealed structures.
▼Conditional projects need to support special coating and corrosion-resistant treatment of motor housing.
7. Low noise and low vibration operation
▲Especially in the factory floor or the use of precision equipment, there are high requirements for noise control.
8. Cost-effectiveness and maintainability
▲The customer wanted a long life cycle, a low failure rate, and easy maintenance (e.g. replaceable bearing
construction).
▼At the same time, it is sensitive to procurement costs, and needs to balance performance and price.
✅ High speed output: 13000–15000rpm, ensuring fast response and efficient delivery of oil pump.
✅ High-power design: 750W drive capacity to meet the needs of industrial continuous operation.
✅ Compact structure and flexible installation: Adaptable to a variety of pump body configurations, easy to integrate.
✅ Reliable and durable: The inside of the motor adopts high-temperature copper wire + reinforced bearing design to prolong the life.
✅ Customizable: Support personalized customization of parameters such as speed, voltage, shaft length, wiring mode, etc.
After replacing the traditional 200W low-speed motor, the motor has achieved more than 3 times the flow rate increase, and at the same time has been running continuously for more than 1200 hours without failure, which has been highly recognized by customers
In addition to industrial oil pumps, it is also suitable for lubrication systems, chemical transportation, hydraulic oil pumps, mobile oil pump trucks and other system equipment
1. Rapid technical response service: to ensure that your needs are quickly responded to within 8 hours, and professional and technical personnel and business personnel are docked
2. Customized service support: on the premise of motor shaft length, size, speed, power, noise and other issues, we can provide professional customized service content without affecting the overall performance
3. Fast delivery and arrival: Whether it is a sample or a bulk order, we will carry out a rapid production inspection after confirming the details of the motor, and the goods will arrive in destination within 20 days to ensure that your next step will not be delayed
4. Certificate support: We have CE, CCC, FCC, ISO9001and other certificates, in line with customs inspection, market entry guidelines
Original motor factory production, direct communication, cost starting price, to avoid the problem of intermediate trade price difference.
BACK
On May 5, the 137th Canton Fair officially concluded. This "Made in China f…
Focusing on the industrial trend of the 2025 Canton Fair, BG Motor continues to …
On April 16, 1963, Martin Luther King Jr. famously wrote in Birmingham Prison th…
The 137th Canton Fair in the spring of 2025 will officially kick off on April 15…
Historical trends in electric vehiclesThe development of electric vehicles (EVs)…
In February 2025, BG Motor ushered in the traditional Lantern Festival celebrati…
